Dogtra's smallest rechargeable bark collar — 2.1 oz., built for sensitive dogs 10 lbs. and up. Every correction starts with a vibration before any static fires. Six static levels (low to medium output) plus a pager-only mode. Fully waterproof, antimicrobial strap, surgical stainless steel contacts. 2-hour rapid charge.
Dogtra’s smallest rechargeable bark collar — sound-activated, low to medium output, for dogs 10 lbs. and up
The Dogtra YS-300 is the most compact rechargeable bark collar in the Dogtra lineup. It uses a sound recognition microprocessor to differentiate your dog’s bark from the ambient environment — other dogs barking, household noise, or outdoor sounds. The collar only responds to your dog’s bark. Built for small to medium sensitive breeds, it delivers low to medium stimulation across 6 levels, with a pager vibration mode that fires before any static correction is delivered.
Every correction on the YS-300 starts with a vibration. If your dog stops barking in response to the vibration, no static is delivered. Only if barking continues does the collar escalate to the selected stimulation level. For sensitive dogs or owners who want to start conservatively, this makes the YS-300 a natural first step before considering higher-output collars. The receiver is fully waterproof, weighs 2.1 oz., and the lithium polymer battery charges in 2 hours. Surgical stainless steel contact points and an antimicrobial collar strap are standard.
YS-300 vs. YS-600 — which one is right
The YS-300 and YS-600 are Dogtra’s two Yapper Stopper models and they serve different dogs. The YS-300 uses sound detection and delivers low to medium correction — it is calibrated for smaller, more sensitive dogs starting at 10 lbs. The YS-600 uses an accelerometer (throat vibration detection), delivers higher output across 10 levels, and is designed for medium to large dogs 35 lbs. and up who need more persuasion. If your dog is small or mild-tempered, the YS-300 is the right choice. If your dog is large, thick-coated, or has a stubborn temperament, the YS-600 will be more effective.
Test mode. Before putting the YS-300 on your dog for the first time, turn the dial to “T” to verify the collar is functioning. Scratch the test area with a pen or coin — the collar should vibrate three times to confirm it is working correctly. If it does not respond, check that the battery is charged before troubleshooting further.
Specs & features
| Model | YS-300 |
| Bark detection | Sound recognition microprocessor |
| Correction sequence | Vibration first, then stimulation if barking continues |
| Stimulation levels | 6 static levels (2–7) plus pager-only mode (P) |
| Output | Low to medium |
| Battery | Rechargeable lithium polymer — 2-hour rapid charge |
| Waterproof | Yes — fully waterproof receiver |
| Contact points | 5/8” surgical stainless steel |
| Collar strap | Antimicrobial |
| Battery indicator | LED battery life indicator |
| Receiver weight | 2.1 oz. |
| Dog size | 10 lbs. and up |
| Warranty | 1-year limited |
In the Box- ✓YS-300 Bark Collar
- ✓Battery Charger
- ✓Contact Points 5/8” Female
- ✓Plastic Dummy Contact Points
- ✓Owner’s Manual